Network analyzer - CommView

24th January 2008

CommView shows the list of network connections, IP statistics, individual packages.
IP packets are decoded down to the lowest level with a full analysis of spread protocols. The program grants full access to the raw data. Intercepted packages can be saved to a file for later analysis. A flexible system of filters allows you to drop away unnecessary packages or intercept only those packages that you want.
This application is designed for small or medium-sized networks, and can run under any Windows 95/98/Me/NT/2000/XP system. It needs Ethernet network adapter (or Wireless Ethernet), with the support of the standard NDIS 3.0, adapter of Token Ring or the standard controller of remote access (dial-up).
CommView implements complete analysis of the following protocols: ARP, BCAST, BGP, BMP, CDP, DAYTIME, DDNS, DHCP, DIAG, DNS, EIGRP, FTP, G.723, GRE, H.225, H.261, H.263, H .323, HTTP, HTTPS, ICMP, ICQ, IGMP, IGRP, IPsec, IPv4, IPv6, IPX, HSRP, NCP, NDS, NetBIOS, NFS, NLSP, NTP, OSPF, POP3, PPP, PPPoE, RARP, RADIUS, RDP , RIP, RIPX, RMCP, RPC, RSVP, RTP, RTCP, RTSP, SAP, SER, SMB, SMTP, SNA, SNMP, SNTP, SOCKS, SPX, TCP, TELNET, TFTP, TIME, UDP, VTP, WAP, WDOG , 802.1Q, 802.1X. A list of protocols will be extended in the following versions of the program.