1.Fixed watchdog timer no work
2.Fixed after enable watchdog timer show ‘CPU Host Frequency(MHz)’ error on BIOS setup menu.
Motherboard overview:
Feature
Intel Pentium 4 Processor (Celeron/Willamette/Northwood)
Socket 478 with FSB 400/533MHz
2 DDR266/200 Memory Sockets
6 channel AC 97 Audio
VIA 10/100 Ethernet LAN
2 ATA133 Channels, up to 4 ATA 133 IDE Devices
6 USB 2.0/1.1 Ports (4 ports by op
Processor
Socket 478 Intel Pentium 4 Processor (Celeron/Willamette/Northwood)
FSB / Transport
400/533MHz
Chipset
North Bridge : VIA VT8751A (P4M266A Ver:CE)
South Bridge : VIA VT8235
Audio Codec : VIA VT1616
LAN Chip : VIA VT6103
I/O Chip : Winbond W83697HF
Memory
2 * DDR Sockets
DDR266/DDR200 NON-ECC DDR SDRAM up to 2GB
Note1: (If you do install DDR 333/400 memory, it will perform at DDR 266 speeds)
Expansion Slots
1 x AGP(2.0) 4X slot (1.5V only)
3 x PCI slots (PCI 2.2 compliant)
IDE / SATA Connectors
2 ATA133 channels, up to 4 ATA 133 IDE devices
Onboard I/O Connectors
1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports USB cable optional)
1 x CD_IN header
1 x COM (serial) port header (Optional COM cable)
1 x S/PDIF out header (S/PDIF out cable optional)
1 x CPU fan header with fan rotation detection function
1 I/O via Back Panel
PS/2 keyboard/mouse, 2 x USB(2.0/1.1), 1 x VGA , 1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Lin-out/MIC
Power
20-pin ATX power connector, 4-pin ATX 12V power connector
BIOS Feature
2Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green
Suspend to RAM (S3), Suspend to Disk (S4)
Wake on keyboard/mouse, Wake on LAN/RTC Timer
Hardware Monitoring
2 FAN sensors, CPU/System voltages and temperature monitoring
Special Feature
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
Certifications
FCC, CE, BSMI,WHQL
Form Factor
Micro ATX (244mm x 225mm)

Albatron PM266A PRO R1.01

Mirror 1