Improved memory compatibility.(Beta version)
Features:
Intel Pentium 4 Processors / CeleronD Processors (Northwood/Prescott)
Socket 478 with FSB 400/533/800 MHz
4 DDR266/333/400 Memory Sockets ( Dual Channel DDR400)
6 Channel AC97 Audio
VIA 10/100 Mbps LAN
2 ATA100 Channels
2 SATA 150MB/s Channels
8 USB 2.0/1.1 Ports (4 ports by optional cable)
Processor
Socket 478 with Intel Pentium 4 Processors / Celeron D Processors (Northwood/Prescott)
FSB / Transport
400/533/800 MHz
Chipset
North Bridge : Intel 865PE
South Bridge : Intel ICH5
LAN Chip : VIA VT6106S
AC97 Audio Codec : Realtek ALC655
I/O Chip: Winbond Smart I/O W83627HF
Memory
4 * DDR Sockets:
DDR400/333/DDR266 NON-ECC DDR SDRAM up to 4GB
Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400
Expansion Slots
1 x AGP(3.0) 8X slot (1.5V only)
4 x PCI slots (PCI 2.3 compliant)
IDE / SATA Connectors
2 ATA100 Channels, up to 4 IDE devices
2 SATA 150MB/s Channels, up to 2 SATA devices
Onboard I/O Connectors
1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan rotation detection function )
2 x System fan headers
2 x 5 pin system panel header (Intel spec)
1 x 3 pin Power LED header
1 x 4 Speaker header.
1 x Front audio header (Intel spec)
I/O via Back Panel
PS/2 keyboard/mouse, 4 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MIC
Power
20-pin ATX power connector, 4-pin ATX 12V power connector
BIOS Feature
3Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer
Hardware Monitoring
3 FAN sensors, CPU/System voltages and temperature monitoring
Special Feature
Zero Jumper Design
Adjustable CPU frequency by 1 MHz increment for overclocking
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card )
Certifications
FCC, CE, BSMI
Form Factor
ATX (224 mm x 305mm)
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Albatron PX865PEC Pro Bios R1.01a(Beta)

Mirror 1