After downloading the file, double-click it to extract an .exe and an .iso file. Use the .exe file to create a bootable floppy disk, or the .iso file to create a bootable CD with your burn program.Start the computer, booting from either the floppy or the CD to launch the BIOS update.Specifications:# CPU mPGA 478B socket# Support for an Intel Pentium 4 processors with a 400/533/800 MHz# Supports Hyper-Threading technology# Chipset: SiS 648 FX DDR400, SIS 963UA MuTIOL Media I/O# Accelerated Graphics Port (AGP) 8x/4x# 2 DIMM sockets for DDR 266/333/400 MHz memory modules up to 2 GB support# 2-channel Ultra ATA133/100/66/33 Bus Master IDE controller# Audio Subsystem for AC’97 processing using the Realtek ALC655 codec on board# Realtek RTL8100(L) Fast Ethernet Controller on board# 3 PCI bus masters slots (1 combo with CNR connector), 1 AGP slot# 3 USB Host Controller# 2 Serial ports and 1 parallel port# PS/2 keyboard and mouse ports and 1 IEEE 1394 port# Audio:1 Mic-In, 1 Line-In, 1 Line-OutIt is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Nec i-Select D3410 (Mini Tower) Bios F15

Mirror 1