NETGEAR has been a worldwide provider of technologically advanced, branded networking products since 1996. Our mission is to be the preferred customer-driven provider of innovative networking solutions for small businesses and homes.
This firmware is not for WGT624 or WGT624v2
New Features
1. Adds WPA-PSK/WPA2-PSK mixed-mode support. I.e., router can now support one adapter using one, while another uses the other.
Bug Fixes
1. Changing LAN IP from default settings to 10.0.0.1/255.0.0.0 used to cause router malfunction.
2. UPnP parser error caused router crash. The application Azureus asked to create 3 ports, but the format caused system crash while parsing the UPnP message.
3. SSID name previously left out repetitive space key value when the router boots. Example: “A B” (A space space B) would be stored as “A B” (A space B).
4. LAN scope used to work improperly. In “LAN IP Setup” page. If you changed the device IP to"192.168.0.1/255.255.0.0”, and changed DHCP server range to “192.168.1.2 -192.168.1.254”, it would not work.
5. Web console’s password would not accept space characters.
6. Intermittently, after reseting and power cycling, the Web-based GUI wouldn’t work.
7. RIP-2M did not get routing table.
8. Fixed that adding/removing user account caused router reboot and action failure.
9. When Connect as Required is enabled and the router is set to PPPOE or BigPond, it used to stay at connect status, even if the idle time elapsed.
10. When enabled DMZ feature, the WAN PC couldn’t access the Apache HTTP server On the DMZ server.
11. WPA-PSK no longer fails in certain situations.
12. Regional wireless settings were updated.

Netgear WGT624v3 1.0.128_1.0.1 101

Mirror 1