Pioneer FirmwareModel: DVR-111Version: 1.29File name: DVRA11_FW129EU.EXEFirmware is the programming instructions contained on a ROM chip within the CD recorder which tell the recorder how to respond to commands issued by software. Some firmware is flash-upgradeable, meaning that you can upgrade the firmware by running a piece of software on the computer attached to the recorder. Other firmware is coded into non-rewriteable chip, so the entire chip must be changed in order to upgrade the firmware. CHANGELOG - Support New 8x DVD-R Media ( 8x writing:E-top ) - Support New 16x DVD-R Media ( 16x writing: Leaddata, AMC, Must Tech ) ( 12x writing:E-top, Infosource) - Support New 8x DVD-R DL Media ( 8x writing:Taiyo-Yuden(Thats), Maxell ) - Support New 8x DVD R Media ( 8x writing:E-top ) - Support New 16x R Media ( 16x writing:MBI, Optodisc, Ritek, Prodisc ) ( 12x writing:VDL ODMS ) - Support New 8x R DL Media ( 8x writing:Ricoh, Ritek ) - DVD-R DL Writability has improved. - DVD-R DL Readability has improved. - DVD R DL Writability has improved. - DVD R DL Readability has improved. - DVD RW Writability has improved. - DVD-RAM Writability has improved. - DVD-RAM Readability has improved. - CD-R Writability has improved. - CD-RW Writability has improved. - CD-ROM Readability has improved.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Pioneer DVR-111 Firmware 1.29

Mirror 1