V8 Supercars 3

V8 Supercars 3
Hints:
———
Submitted by: mark
In setup mode for your v8 supercars adjustment of camber should always be
negative and i set mine about 1 to - 1.8 for tight long straighted tracks
and for lots of corner tracks -1.8 to-2.3.and 0 to -0.5 for the rear.front
toe should be set to +1 to +2 this is to help offset the - degrees of camber
and also because the v8 supercars are rear wheel drive,so they tend to push
the front wheels out hence you putting a +toe in to the front.Try the lowest
settings first and then gradually chang higher until satisfied with vehicle handling.
Hope this can be of help or starting point in v8 supercars three vehicle geometry.If
anyone has any hints or tricks i am always willing to learn cheers.